Harvester Bars

Harvester HeadWe carry harvester bars and chain for both the large 3/4" pitch and the smaller .404" pitch chain. We offer solid bars with sprocket noses, solid bars, and replaceable-sprocket-nose bars. We can also supply double-ended slasher bars.  We have a large inventory of Oregon harvester products, but other brands are available by special order.

If you have any questions or need assistance, please call.




404" Pitch Solid Harvester Bars w/Replaceable Nose

Oregon® solid harvester bars are made of high-grade alloy-steel. The nose sprocket assembly is completely replaceable. The bright yellow bar body comes in .080 gauge.

18H 404 Harvester Bar


404" Pitch Solid Harvester Sprocket-Nose Bars

Oregon® solid harvester bars are made of high-grade alloy-steel. The nose sprocket features patented Cradle sprocket-tooth design, which gives an exceptionally strong and reliable sprocket nose. The bright yellow bar body comes in both .063 and .080 gauges.

18H 404 Harvester Bar16H 404 Harvester Bar


.404" Pitch Jet Fit Solid Harvester Sprocket Nose Bars

Oregon® Jet-Fit® harvester bars allow harvester operators to change the bar and chain on their machines in about 30 seconds. Solid-body Jet-Fit® bars offer all the durability and performance of Oregon® Solid Harvester bars and run heavy-duty .080"-gauge Oregon® 18HX chain. They work on harvesters with a 15mm wide Jet-Fit® mounting slot and work with both automatic and manual chain tensioners.


Jet Fit Bar



3/4" Pitch Harvester Bars

Oregon® 3/4" pitch harvester bars feature solid-body construction and are made of specialized alloy-steel material for rugged performance. These bars are so tough, they can usually be restraightened if bent during cutting mishaps. ; Available in either:

  • Replaceable-sprocket-nose design. This offers superior cutting efficiency and maximum bar and chain life. The patented Cradle™ sprocket-tooth design results in the critical nose-sprocket area being strong and reliable. Because the nose is replaceable, when the tip becomes worn or damaged, a new nose can be installed quickly and easily.
  • Armor-tip design. Superior performance in abrasive cutting conditions. Ultra-tough wear resistant alloy is welded to the bar's nose.

3/4 Harvester Bar Replaceable Tip
3/4 Harvester Bar Hard Tip


Double-Ended Slasher Bars

Oregon® 3/4" pitch slasher bars are made of specialized alloy-steel material and feature a "double end" design for use on slashers. Grooves are .122" for use with 11H/BC chains. Three mounts are available, which fit: FEC /Hudson, CTR, and SDR slashers.

Slasher Bar


Please see Oregon's web site for a listing of current bars and chain that fits your machine. Their Selector Guide will help you identify the correct products.

Oregon Harvester Guide Banner

If you have any questions or need assistance, please call.